ASSETS = OWNER’S EQUITY + LIABILITIES
Creditors are a liability. (You owe them.) = Payables.
Increase of creditors is a source of cash.
Debtors are an asset. (They owe you.) = Receivables.
Increase of debtors is a consumption of cash.
Net Profit = Change in Owner’s Equity.
Gross Profit = Sales less Cost of Sales.
Matching Convention: Profit is calculated by matching costs with the revenue recognized during the period.
Allocation Convention: First, determine all costs. Second, allocate costs to sales, inventory, etc.
Cost Convention: Items are valued at the historical cost of all input factors.
Conservatism Convention: Recognize costs immediately and revenue only when it is certain.
Accruals Convention: An obligation from a credit worthy customer may be regarded as a sale.
Cost of Raw Materials in P/L Account = Opening Inventory + Purchases – Closing Inventory
Valuation of Closing Inventory can be done by FIFO, LIFO or Average Value.
High Valuation of Closing Inventory = High Profits, because low valuation of matched materials cost.
Types of inventory: Raw Materials, Work-In-Progress, Finished Goods.
Reserves are unallocated profits. Reserves would be a part of owner’s equity, except for some reason are being held back from recognition as such. Bad debt reserves are owner’s equity held for the purpose of covering bad debt that may arise in future periods.
Current Cost Accounting
· Straight Line: Depreciation = (Purchase Cost – Expected Residual Value) / Service Life
· Reducing Balance: Depreciation = Current Book Value * Calculated Rate
Calculated Rate = [IMG]file:///C:/DOCUME~1/NESMA~1.MOH/LOCALS~1/Temp/msohtmlclip1/01/clip_image002.gif[/IMG] where n = years of service, rv = residual value, pc = purchase cost.
· Consumption: Depreciation = [IMG]file:///C:/DOCUME~1/NESMA~1.MOH/LOCALS~1/Temp/msohtmlclip1/01/clip_image004.gif[/IMG] where rhy = running hours this year, rhl = lifetime running hours.
Four adjustments need to be made to convert Historic Cost (normal) statements to Current Cost statements.
Adjustment 1: Fixed Assets & Depreciation
1. List assets at current value (usually replacement cost) less total accumulated depreciation, adjusted for the new value. The current cost revaluation reserve is credited the difference, so that the profit & loss account does not show any gains or losses for revaluation, which is after all not profit from operations.
2. The depreciation charge to be accounted for this year is the difference between the new total accumulated depreciation desired, and the total accumulated depreciation as of last year. The “current consumption” depreciation is calculated per normal practice and reflected on the profit & loss statement. The remaining “backlog” or “top-up” depreciation is DEBITED from the current cost revaluation reserve, because it reflects a lower starting book value of the asset in question than is otherwise shown.
Adjustment 2: Cost of Sales
1. Find a suitable price index for the beginning of the year, end of the year and average through the year. Convert all prices from historic dollars to index-average dollars by dividing by the index at the relevant time and multiplying by the average index.
2. Determine current cost of sales by: (opening inventory + purchases) – closing inventory, all in adjusted current values.
3. Cost of Sales Adjustment is the difference between historic cost of sales and current cost of sales. This adjustment is added to cost of sales (reducing profit) and also added to the current cost revaluation reserve.
4. Closing inventory value must be listed at the current prices. Adjust closing inventory value by the appropriate price index, and add the resulting adjustment to the valuation on the balance sheet and also to the current cost revaluation reserve.
Adjustment 3: Monetary Working Capital
1. Determine the opening and closing MWC (debtors etc. less creditors etc., but not including cash because cash is not WORKING capital). Subtract opening from closing to determine this year’s change in MWC.
2. Isolate the volume change component of the change in MWC by taking the difference of the opening and closing values as expressed in current dollars. (Convert to current dollars using indexes as in the Cost of Sales adjustment.)
3. Find the price increase component by subtracting the volume change component from the total change from step 1.
4. Deduct the price increase component from operating profit and add it to the current cost revaluation reserve.
Adjustment 4: Gearing Ratio Adjustment
1. Determine the gearing ratio. Find net borrowings (loans less cash but not including creditors) and net operating assets (net borrowings plus owner’s equity plus all reserves). Gearing ratio is net borrowings divided by net operating assets and is usually expressed as a percentage.
2. Multiply the three previous adjustments by the gearing ratio to determine the amount which should be “backed out” (because loan payments are fixed at historical price levels).
3. Credit this amount to operating profits and debit this amount from the current cost revaluation reserve.
Off-Balance Sheet Transactions
Current Ratio = Current Assets / Current Liabilities. Measures ability to pay bills. Rule of thumb: 2.
Quick Ratio = (Current Assets – Inventory) / Current Liabilities. Measures ability to pay bills NOW. Rule of thumb: 1.
Profit Margin = Profit after interest and taxes / Sales.
Return on Total Assets = Profit after interest and taxes / Total assets.
Return on Specific Assets = Profit after interest and taxes / Inventory.
Return on Owner’s Equity = Profit attributable to parent company / Owner’s equity.
Return On Investment (from Dupont Chart) = Profit/Sales x Total Asset Turnover.
Capital Structure Ratios:
Fixed to Current Asset Ratio = Fixed assets / Current assets. Meaningless without industry average to compare to.
Debt Ratio = Total debt / Total assets. Also known as the gearing or leverage ratio.
Times Interest Earned = (Profit before tax + Interest charges) / Interest charges. Measures the company’s ability to weather loss of profit or increase in interest rates without defaulting on loan obligations.
Inventory Turnover = Sales / Inventory. Measures number of times inventory is turned over during a year.
Average Collection Period = Debtors / Sales per day. Calculates the average number of days a debtor goes before paying.
Fixed Assets Turnover = Sales / Fixed assets. Measures how hard assets are worked. Be careful about asset valuation. If a company has more up-to-date (therefore higher) asset values on the books, their ratio will look worse.
Stock Market Ratios:
Earnings Per Share = Profit after tax, minority interests and extraordinary items / Number of ordinary shares in issue.
Price to Earnings = Market price / EPS. Measures how many years of profit you must spend to buy a share.
Dividend Yield = Dividend per share / Market value per share. Expressed as a percentage.
Dividend Cover = Net profit of the year / Dividend payout. Shows the degree to which the dividend is reasonable to pay out.
Acquisitions & Mergers
Companies can use a variety of means to control what appears on their financial statements for any of the obvious reasons. This is usually illegal, depending. Tactics are:
Controlled non-subsidiaries – owning less than 50% of a company but structuring it in such a way as to retain management control, perhaps by owning all the voting stock but also issuing non-voting stock.
Consignment inventories – arranging for inventory to be owned by someone else so you don’t have to report it as an asset. Example: A car dealership might not take possession of a car until it is sold, even though it is obvious that the car on the lot is a productive asset to the dealership.
Debt factoring – If debts (accounts receivable) are sold to a third party for collection, they can be written off the books. However, if the deal with the third party includes a right of recourse against the company, the debts to all intents and purposes still belong to the company and should (but might not be) reported as such.
Goodwill is the amount paid in a takeover over and above the book value of the company being bought. It represents hidden assets, tangible and intangible, that the buying company is willing to pay for. Goodwill can be written off immediately at the time of purchase, or capitalized over its useful lifetime. It depends on management attitudes and the nature of what constitutes the goodwill.
Research & Development
Brands are intangible assets. Brands include names and appearances, but also include technical know-how such as the recipe for an item of confectionery or the water content in malt whisky. Some companies report their brands as assets on the balance sheet. Some of the reasons for doing this are:
- Smaller companies which desire to be left alone can use brands to increase their book value, making it more costly for predator companies to attempt takeovers;
- Aggressive predator companies can use brand assets to drive up their share prices, reducing the number of shares they must use to finance share-swap takeovers;
- Highly leveraged companies can use brands can be used to increase non-loan assets, reducing their apparent debt ratio;
- If brands are listed as separate assets, they can be capitalized during a merger or takeover, reducing the amount of goodwill and the problem of figuring out how to deal with it.
However, if you do put brands on the balance sheet, you have to depreciate them over their expected useful life. This will reduce profits, which abrogates some of the advantages of putting the brand on the balance sheet in the first place. It is hard to know the useful life of a brand. Some companies claim that brands have an indefinite life, but auditors are not convinced.
Valuing a brand is also difficult. Two methods that are sometimes used:
Historic Cost – all costs involved in developing and maintaining the brand are capitalized. This method claims to be objective, but it is difficult to know if any given expense was for developing a brand or simply for selling product. In essence, previously written-off costs are reintroduced as capital items.
Earnings Method – Management attempts to attribute the actual earnings of the company to specific brands and then apply a multiplier to this figure which reflects the brand strength over the foreseeable future. This method is very subjective and based on wild guesses about future earnings potential.
R&D expenditure is usually written off in the year it is incurred. However, some companies claim that since they expect to derive benefit in future years from their R&D expenditure, it should be capitalized and depreciated. This is especially true of companies where R&D represents a major percentage of total expenditures, for example software companies. The problem is that there are usually major technical and commercial risks associated with R&D, so the conservatism principle says that it should be written off immediately.
|Financial Accounting ||Management Accounting |
|Backward-looking. Reports on past performance. ||Forward-looking. Supports management decision-making. |
|Highly structured around the accounting equation. ||No formal structure. Designed ad hoc by each company. |
|Accounting professional standards apply. ||No externally imposed rules. |
|Compulsory by law. ||No – but all companies use it in some form. |
|Strictly money terms. ||Mostly money terms, but also perhaps quantities, etc. |
|Reports on the company as a whole. ||Generally reports on specific activities or departments. |
|External auditors go over the books frequently. ||No mandatory auditing, but some companies audit internally. |
It is important to remember that management accounting is a service function that provides information relevant to a decision, but does not actually make the decision. Other factors besides cost and money information are generally considered in decision-making.
Job Costing: Costs are allocated (apportioned) to individual finished items. Direct costs are allocated to the units to which they apply, and overheads are allocated according to some scheme.
Process Costing: Used where identification of individual finished items is impossible. Example: Oil refining. Process costing collects information about all costs during an accounting period and divides those costs by the total quantity output.
Variable Costs: Costs which vary directly with output, and for which if output were zero, cost would be zero. Example: Raw materials.
Fixed Costs: Costs which are the same regardless of output. Example: Factory rent.
Semi-Variable Costs: Costs which vary with output, but not as directly as variable costs. Example: Depreciation of factory machinery. Machinery will wear out faster while it is being used, but it will lose value at some rate even sitting idle.
Break-Even Point: The sales quantity where total costs equal total revenue at a given price. Or you can plot just profit per volume, particularly if you want to compare different cost structures (ie, with or without the big new machine).
Contribution Margin = Sales Revenue – Variable Costs
Contribution Margin Ratio, aka Profit/Volume Ratio = Contribution Margin Per Unit / Sales Revenue
Break-Even Point = Fixed Costs / Contribution Margin Ratio
Assumptions underpinning cost-volume-profit analysis (break-even analysis):
- All costs can be identified as variable and fixed.
- All costs behave precisely as either variable or fixed.
- Sales price per unit is known in advance and remains constant with all output volumes.
- Sales mix is maintained precisely as volume changes.
- All production is sold.
Direct Costs, aka Traceable Costs: Costs which can be directly identified with production. Strong overlap with variable costs but not precisely the same thing.
Indirect Costs, aka Common Costs: Costs which cannot be directly identified with production. Often fixed costs.
Manufacturing Overhead: Depreciation on factory equipment; energy costs for running the factory; salaries of foremen, supervisors, QA inspectors.
Non-Manufacturing Overhead: Depreciation on office equipment; computers and motor vehicles; building rent; salaries of office and sales staff and general management.
Product Costs: Costs which can be attached to production items without undue difficulty. Product costs contain a mixture of fixed, variable, direct and indirect costs.
Period Costs: Costs which are best treated in time periods. Again, period costs contain a mixture of fixed, variable, direct and indirect costs.
Controllable & Non-Controllable Costs: Refers to whether management has the ability to choose whether or not to incur the costs. Costs can only be said to be controllable or not from the point of view of a particular manager. For example, the company’s insurance premiums are non-controllable by a shift supervisor but controllable by the finance director. Controllability is also influenced by the time-scale involved. In the very short term no cost is controllable by anyone. The concept of controllable costs is important in budgeting. Managers should be held to budgetary accountability for their controllable costs only.
Standard Cost: The engineered and researched cost that is budgeted for each item of production.
Actual Cost: Period-by-period measurement of the actual expenditure for each item of production.
Engineered Costs: Costs which are unavoidable if the company wants to continue production. Example: Raw materials for a given product design. There is no way to avoid a certain amount of steel if you want to build a car.
Discretionary Costs: Costs which need not be incurred every accounting period at the level management has come to expect. Examples: Administrative support, R&D, machine maintenance.
Beware the unitizing of fixed costs. If fixed costs are $20,000 and variable costs are $100 per unit, then as quantity moves from 100 to 200, variable costs per unit remain $100 but fixed costs per unit changes from $200 to $100. Making decisions based on a fixed cost per unit is deceptive if quantity can change.
To determine how to allocate resources, determine the limiting factor and then calculate contribution per limiting factor.
Joint Products & By-Products
Plantwide Overhead Rate = Budgeted Total Overhead / Budgeted Production Quantity (single product firm)
Multi-product firms require an “activity base” like direct labor cost or machine hours. This is then used as the denominator to get a company-wide overhead rate. At the end of the year, most likely the actual total overhead and actual production quantity will be different. The amount by which the actual overheads differ from the total allocated overheads will be credited or debited directly to the profit & loss account.
Departmental Overhead Rate = various different overhead amounts and activity bases for the various different departments. Machine calibration might use machine hours as an activity base. Personnel might use total headcount. But some method must be applied to allocate these various overheads to cost items (production).
Direct Method. Manufacturing departments are each allocated a share of support department overheads, by their percentage consumption of activity bases. For example, if machining has 75 employees and fabrication has 25, then $50,000 of budgeted personnel overhead will be allocated as $37,500 to machining and $12,500 to fabrication. Once this is done, the total budgeted overhead to be dealt with by each manufacturing departments will be known. In order to allocate this to actual cost items, the manufacturing departments will also be given activity bases. So if machining has a total of $125,000 overhead allocated, and is budgeted to use 2500 machine-hours, machining will be assigned a $50/machine-hour overhead rate.
Step Method. The step method recognizes that support departments provide services to other support departments as well as to production. The first support department’s overhead is allocated to all other departments, etc., until only manufacturing departments are left. The order in which departments’ costs are allocated could be decreasing order of total overhead, decreasing order of percentage of services rendered to other support departments, or some other scheme. When determining any support department’s activity base, ignore that department’s consumption of its own resources. IE, if total company head count is 200, but personnel (which goes first) has 10 staff, the total activity base is 190. The second and subsequent service departments must allocate not only their original overhead, but also their share of overhead from earlier allocations.
A joint product is two or more products which must appear together during the process of production. If management has the option of not allowing the second product to appear, it is not considered a joint product. By-products are joint products where the secondary product is considered undesirable or low-value compared to the main product.
Joint products present a problem: How should costs be allocated between the two (or more) products? Some methods:
Equal Shares: All costs are simply divided in half (or whatever) and allocated to each individual product.
Physical Characteristics: Costs are allocated based on some measurable quantity, like weight or volume.
Sales Value at Split-Off: Costs are allocated based on the value which could be realized if the products were sold immediately, without further processing, at the split-off point.
Ultimate Net Sales Value: Costs are allocated based on the net value realized if the goods are sold after all further processing that the company plans to perform.
By-Product Zero Value: All costs are allocated to the main product, with the by-product produced at zero value. If any of the by-product is sold, it is credited to sales. Any of the by-product that is kept in inventory is listed on the balance sheet, but at a zero cost.
Absorption & Variable Costing
An equivalent unit of production is an assessment of the degree of completion of a unit under each major component of cost. For example, if four million litres of paint are in work-in-progress inventory and are considered 25% finished, work-in-progress is valued as one million litres of equivalent units. Equivalent units can be assessed for each major cost category (raw materials, labor). The purpose is to assign a number of equivalent units to each accounting period so that costs can be allocated to production. The problem is opening and closing inventory that may be partially completed at any given time. For each cost category, sum: 1. Effort expended this period to complete opening inventory, not counting whatever was done in the previous period. 2. Units started and completed during the period. 3. Effort expended during the period on closing inventory.
In allocating direct costs, add the balance sheet value of opening inventory to the expenditure during the period for each category (materials, labor). Divide by total equivalent units to get cost per equivalent unit.
[More process costing stuff in Module 10 was skipped]
Full Costing aka Absorption Costing: Calculate Cost of Sales including fixed costs allocated to production. Report net profits less other, unallocated expenses. Fixed costs are bundled into the cost of sales figure.
Variable Costing aka Direct Costing: Calculate Contribution Margin by subtracting Variable Cost of Sales from revenue. Then subtract fixed costs as a lump sum. Only variable costs are allocated to production; fixed costs are listed separately.
Denominator Volume Variance. Under absorption costing, fixed costs are allocated based on overhead rates that use the budgeted production quantity as a denominator. Unless the actual production quantity exactly equals the budgeted production quantity, too much or too little fixed cost will be reported. At the end of the year, the actual production quantity and actual fixed costs are known. The denominator volume variance is the actual fixed costs less the amount of fixed costs that were allocated to production in the cost of sales figure. In other words, the denominator volume variance is an adjustment so that the correct amount of fixed costs will appear on the profit and loss statement.
Absorption and variable costing can also produce different profit figures. If units are either drawn from or added to inventory (ie when sales does not equal actual production), the two costing systems will assign a different value to the opening and closing inventories. Variable costing places items into inventory at their variable cost only. Absorption costing places items into inventory bearing their share of overhead costs. Example: Assume opening inventory is zero. 10,000 items are produced but only 9,000 are sold. The variable cost of each item is $50 and fixed costs are $200,000. Variable costing will show a closing inventory value of $50,000. However, absorption costing adds a $20 share of overhead to the value of each item. As a result, absorption costing will show a closing inventory value of $70,000. Absorption costing must therefore also show a cost of sales figure that is $20,000 less than that shown under variable costing, hence $20,000 more profit. The reverse situation, where items are drawn from inventory and more are sold than produced, will result in lower profit under absorption costing.
Closing Down a Unit
1. Define the problem and list all feasible alternatives.
2. Cost the alternatives. The relevant costs to consider are solely those that differ between the alternatives under review.
3. Assess the qualitative factors. Most decisions involve more than just considering the accounting numbers.
4. Make the decision.
It is essential that a company-wide viewpoint is taken rather than a departmental one.
Again beware the unitizing of fixed costs. Full cost figures can be deceptive because the temptation is to vary them with production. IE if we plan to make 1,000 widgets and their manufacturing cost is shown as $50 each, it is tempting to assume that if we only make 800, the total cost will now be $40,000. But if that $50 included $20 worth of allocated overhead, then the actual cost to make 800 will be $44,000, and at the new production level the cost per unit will now be $55. When unitized, variable costs appear fixed and fixed costs appear variable.
Costs which have already been incurred are called sunk costs and should be ignored when looking for relevant costs. Since the cost has already been incurred, and this fact cannot be changed, the cost will not differ between any possible alternative decisions to be made. Therefore it is not a relevant cost, as per the definition in Step Two above. Relevant costs are always future costs and therefore always involve cash flows. But even future costs are not relevant if they are unavoidable across all alternatives being considered.
Special Sales Orders
It is fundamental that variable costs are kept separate from fixed costs in decisions concerning the suspension of activities. It is also tempting, but potentially misleading, to ignore fixed costs as non-relevant. Fixed costs most likely change when a unit is shut down. Qualitative factors are also likely to be important. It is also likely that there will be special one-time costs associated with closing the unit.
Decision to Process Further
Companies are often presented with opportunities to sell at lower than normal prices. These orders might arise because of an unusually high quantity, a perceived strategic value, etc. It is misleading to compare the offered price to the full cost of manufacturing. If the offered price is higher than the variable cost of manufacturing, it makes a contribution to fixed costs and therefore benefits the company. This is not to say that a company should always accept offers to buy at any price above variable costs. However, such an offer should not be rejected outright simply because it is higher than the full cost of manufacturing. Other factors, such as demand for the product, future business that might result from the sale, etc., must be considered before deciding to accept or deny the order.
Usually in the context of a by-product or joint product, a company may have to decide whether to sell a given product as it stands or apply further processing to increase the eventual sales value. The problem is that in deciding whether or not to apply additional processing to one or the other of two joint products, the method of allocating costs between the two products can sharply affect the outcome of the decision. The answer is to ignore costs that are not relevant. The only relevant costs are the additional money spent on the further processing, and the additional revenue generated by the increase in sales.
Reasons for budgeting: Co-ordination, planning, motivation, control.
Problems with budgeting:
- Time taken. Budgeting should start as late in the year as possible consistent with getting agreement by the start of the new year.
- Lack of top management commitment. Line managers will not take budget processes seriously if they see top management disregarding their own budget constraints. Top management must be aware of their own budgetary responsibilities.
- Dictatorial control. If budgets are simply dictated from on high, line managers will see them as a form of punishment rather than an exercise in goal-setting. Budget planning requires consultation and co-ordination with all levels.
- Responsibilities are blurred. Managers should be held responsible for their own controllable costs only. If they are held responsible for non-controllable costs, they will cease to care about their budget performance.
- Circumstances can change. If a budget is produced at the beginning of the year, by the end of the year it may no longer have much relevance to reality. This problem can be addressed in one of two ways. First, the original budget can be maintained as a benchmark to measure performance, but all variances caused by external events are adjusted before management performance is measured. Second, the company can adopt a rolling budget that can be amended as soon as disturbances become evident.
- Budgeting rewards inefficiency. If two departments have the same initial budget, but only one is run efficiently to drive down costs, then in the next year’s budget rounds the efficient department will be penalized with a budget cut. This is particularly likely when budget changes are dictated as across-the-board percentages. The solution is for top management to adopt a more rigorous approach to budgetary planning and encourage competition for surplus resources within the organization.
Another approach to driving inefficiency out of budgets is called Zero-Base Budgeting. ZBB assumes that every department is starting from scratch at the beginning of the year. ZBB divides activities into packages that can be separated from each other. These packages of discrete activities are costed and then ranked in order of top management priority. ZBB also requires corporate functions to identify minimum levels of expenditure below which their activities cannot really operate. New requests for increased spending must be prioritized against existing commitments.
A standard cost is the budgeted or expected cost of a single unit of production (cost item). Standard variable cost includes direct material, labor, etc. along with variable overhead. Standard full cost also includes a share of fixed costs.
Production quantity will very likely differ from what was anticipated at the beginning of the year. A flexible budget is a budget statement that shows what the expected costs should have been for any level of output, so that the actual costs can be compared to planned costs for the output that was actually generated. The planned output is shown at the top but does not figure in any of the dollar amounts.
A simple dollar variance from budget does not necessarily show enough information to understand what happened. In most cases (materials, labor), two conditions can cause a variance in the actual cost: More or less quantity (units, hours) might be used than planned, or the quantity used might have cost more or less than planned. Two variances, the Efficiency Variance and the Price Variance, show the effect of each change and, added together, should sum to the actual dollar variance.
EV = (Standard Quantity – Actual Quantity) x Standard Price Per Unit
PV = (Standard Price Per Unit – Actual Price Per Unit) x Actual Quantity Used
Variable overhead variances are similar (EV = efficiency variance; SV = spending variance):
VOhEV = (Standard cost of flexible budget VOh for units produced) – (Standard cost of actual VOh for units produced)
VOhSV = (Standard cost of actual VOh for units produced) – (Actual costs incurred)
Fixed Overhead Spending Variance = Budgeted Fixed Overhead – Actual Fixed Overhead Expenditure
Fixed Overhead Denominator Variance = Budgeted Fixed Overhead – Amount Applied to Units Produced
Contribution Variance = (Actual Contribution Margin Per Unit – Budgeted CMPU) x Actual Sales In Units
Volume Variance = (Actual Sales Units – Budgeted Sales Units) x Budgeted Contribution Margin Per Unit
Sales Quantity Variance = (Actual Sales Aty For This Product – Budgeted SQFTP) x
(Budgeted Weighted Average Contribution Across All Products)
Sales Mix Variance = (Actual Sales Qty For This Product – Budgeted SQFTP) x
(Budgeted Contribution Margin Per Unit Of This Product – BWAC Across All Products)
Check: Sales Quantity Variance + Sales Mix Variance = Sales Volume Variance
Advantages of divisions: Specialization; Size; Motivation; Better decisions; Career mobility.
Disadvantages of divisions: Lack of control; Cost; Internal rivalries.
Divisional performance measurement:
ROI – Profits / Net Book Value. The problem is, as assets depreciate and profit stays the same, return looks better.
ROI – Profits / Current Replacement Value. But as in current cost accounting, replacement value is subjective.
Both ROI calculations can lead to poor investment decisions. If an investment’s return is lower than the currently calculated ROI, divisional management will tend to reject it because it will lower overall ROI, even if it is a profitable investment with a return higher than the company’s cost of capital. Residual Income overcomes this problem.
Residual Income – Divisional controllable profit is calculated, and then interest is charged at the company’s cost of capital rate against the division’s net book value. This provides an absolute dollar figure of profits, which will be contributed to positively by any investment above the company’s cost of capital. The selection of imputed interest rate (cost of capital) matters, and different values can change the ranking of divisions.
The Investment Process
Based on the principle of divisional autonomy, divisions are free to choose whether to buy or sell from other divisions of the same company or from entirely different companies. However, divisional insistence on maintaining profit margins when doing business with other divisions can lead to behavior which is not in the company’s best interests. For example, if division A makes a part that it sells for $10, but division B can buy the part from an outside source for $8, the two divisions may decide not to sell to each other. However, if division A’s variable cost is only $5, and spare capacity exists, then from the company’s perspective, a loss of $3 is incurred for each part that division B buys from the outside source.
The question is, how can a fair price be established that is consistent with the company’s objectives? Can HQ force the divisions to deal with each other, or does divisional autonomy take priority?
Market Prices. This is the best method because it can be objectively tested by everyone. Care must be taken to choose a valid price, from a properly functioning (competitive) market, for a product of substantially identical features and quality.
Cost-Based Prices. Usable where a market price cannot be established. The problem is that many different types of costs can be determined: Full Costs – the problem here is that a unitized fixed cost becomes a part of the variable cost of the buying division, which leads to all the usual problems. Variable Costs – Possibly the best choice from a company point of view, but the selling division sees none of the profits of the eventual sale, and will rightly ask why the buying division should get credit for all the profits. Negotiated Costs – Divisional managements agree on some price that is acceptable to both, by whatever means. HQ may want to have some say in the outcome. HQ may even be willing to absorb the difference between a desired selling and buying price, in the short term.
Transfer pricing can also be impacted by international trade factors. If a company deals in nations with varying tax rates, it will want to arrange transfer pricing so that profit emerges at the lowest tax rates. Of course, tax authorities will exercise some control over what transfer prices can be selected. Restrictive repatriation policies are also a factor. A company will not want to allow profits to emerge in a nation which restricts or prohibits cash transfers back out of said nation.
1. Search: All managers have a responsibility to search for worthwhile investment opportunities.
2. Evaluation: Of all opportunities identified, only some will actually be undertaken. The evaluation process must both determine which of the available opportunities are worth pursuing, and determine which of those deemed worthwhile are to be undertaken. The strategic plan of the company will have substantial bearing on which investments are chosen. Financial analysis will be an important contributing factor to the decision, but management may rightly decide to go with a project other than that with the best financial return, due to qualitative factors outside the realm of accounting.
3. Control: Once an investment has been undertaken the financial control of it will follow normal budgetary control procedures. Actual expenditure must be tracked against planned, and achieved benefits against expectations.
Discounted Cash Flow Approach
Even in an inflation-free world, money in the future has a lower value than money today. This is because a company’s capital has to be financed somehow, through loans, owner’s equity, or whatever, any of which will have associated costs (interest, dividends, whatever). Also, money available right now can be used to generate returns immediately, while money in the future only generates returns starting whenever it is received.
The simple interest equation is: FV=PV(1+I)N, where I is the rate of interest and N is the number of years. This gives the future value of a sum invested today at a fixed interest rate. The present value equation is: PV=FV/(1+I)N, which is just an algebraic transformation of the simple interest equation, and gives the amount that you would need today in order to produce a given future value in a given number of years. For example, if you expect to receive $200 in two years, at a 9% rate of interest you would consider the present value of this receivable to be 200/(1+0.09) 2 =$168.34. Given the choice between receiving $180 today and $200 in two years, you would choose the $180 if you believed a 9% interest rate was applicable.
Net Present Value
When comparing alternatives that involve money values in many different future periods, the discounted cash flow approach simply reduces all values to present values. If one alternative provides revenue of $100 this year, $200 next year, and $300 the year after, is it better or worse than an alternative that provides $150 this year, $100 the next, and $350 the year after? The answer is to discount values for each year by the appropriate factor: 1/(1+I)N with an appropriately chosen interest rate. If the interest rate used is 12% then the discount factors will be 1.00 for this year, 0.89 next year, and 0.80 the year after. So for the two alternatives above, the first is worth $100 + $178 + $240 = $518, and the second is worth $150 + $89 + $280 = $519. However, the choice of interest rate is very important. Different rates will result in different relative valuations.
Internal Rate of Return
The net present value approach uses discount factors based on the company’s cost of capital rate to reduce all expenses and revenues of a project to a single present value figure. If the NPV is greater than zero, then the project returns more than the cost of capital, and should be accepted. If the NPV is less than zero, then the project returns less than the cost of capital and should be rejected.
If we are absolutely certain about the cost of financing a project, and the cash flows (expenses and revenues) involved, then the net present value represents the amount of money we could spend right now and still break even on the project including its finance costs.
Differences between NPV and IRR
The IRR is also known as the DCF Return, or sometimes just the Rate of Return. The IRR is the cost of capital at which the NPV would be zero. In other words, the IRR is the maximum interest rate the company could pay on borrowed money and still break even on the project. Therefore, if the IRR is greater than the company’s cost of capital, the project should be accepted; if it is less, the project should be rejected. The IRR is sometimes undefined because there is not always an interest rate that can possibly reduce NPV to zero; for example, if all cash flows are of the same sign.
Risk and Uncertainty
In terms of the accept/reject decision, NPV and IRR give identical results. If NPV>0, then IRR>Cost of Capital; and if NPV<0, then IRR<Cost of Capital. However, when two or more investments are being compared, IRR and NPV can produce different rankings. This is primarily because NPV is an absolute measure but IRR is a ratio. An investment of $100 yielding $10 per annum forever has an IRR of 10%, but so does an investment of $1,000,000 which earns $100,000 per year forever. This is a relative measure; it relates the return to the original investment. However, the NPV of the two projects will differ quite significantly due to the difference of magnitudes of the sums involved.
When two projects which have different patterns of cash flows are being considered, an evaluation of the difference between the two may provide an insight into the implications of accepting one and rejecting the other. IRR and NPV can be calculated on these differences. This is particularly useful with add-on or tier packaged projects like those that might be produced from a zero-based budget.
Payoff or Payback Period
NPV and IRR analysis require knowledge of the future cash flows of the project being analyzed. However, perfect certainty about these cash flows is not generally possible. There is no analytical technique which can eliminate this uncertainty. One possible approach is to create a “higher hurdle” for projects perceived as high risk. Management may decide that the target rate of return (imputed cost of capital) should be 8% for low-risk projects like replacement of existing equipment, 12% for medium-risk projects like opening a new factory, or 20% for high-risk projects like engineering a new product line. This serves to increase the margin of safety for riskier projects. The margin of safety is the amount by which the business can be wrong about its estimates before incurring losses.
Payback is the time taken to recover the original investment, and tries to answer the question “When will we get our money back?” In its simplest form, payback is the time taken for the positive cash flows to recoup the original investment. An investment of $50,000 that generates revenues of $12,500 per year will have a payback period of four years. This approach ignores the time value of money. A better approach would be to use discount factors for future amounts. At a 10% cost of capital, the payback period for the above situation will be just under 5 years. An alternative method of calculating the discounted payback period is to add interest to the outstanding capital each year and deduct the undiscounted cash flows.
Essentially, build a model of the project, vary parameters, and check the results. If small changes to a given parameter make a big difference, then that parameter should be considered critical and any uncertainty in its forecast should be taken seriously. If it can vary widely without affecting the outcome very much, then even a large uncertainty in the parameter does not represent a substantial risk to the project. Sensitivity analysis is not an evaluation technique and does not enter directly into the accept/reject decision. Instead, it is a further analysis which is an aid to management in the exercise of their judgement.
The Key Investment Factors
While sensitivity analysis can determine the likely effects of changes in any given variable, it does not provide insight into the probability that the variable will change or the magnitude of likely changes. Risk analysis is the attempt to analyze variables in terms of the probability of different values. For example, sales reps might be unwilling to commit to an estimate of a $20 selling price, but might give probabilities for a range of possible selling prices. Risk can be regarded as the spread around the central value, and the greater the spread, the greater the risk. Of course, this analysis does not eliminate the risk, and the question of whether the risk is worth the potential reward is to be answered by managers, not accountants.
1. Capital Investment – The total fixed and working capital which will be required for the project. Not only the total is important, but the timing. It is also important that not only are the outflows included such as the cost of new buildings, equipment, etc., but also the inflows that they may generate, such as tax allowances, sale for scrap at the end of the project, etc. This applies equally to working capital, since at least in theory the project’s creditors and debtors will run down to zero at the end of the project, likely resulting in a cash inflow as disinvestment in working capital occurs.
2. Operating Cash Flows – Short term cash expenses, such as revenue from sales, outflows from operating costs, etc. The emphasis is on cash items. Non-cash expenses such as depreciation which are essentially accounting book entries do not have a bearing here. Only actual cash flows are considered. An important factor affecting cash flows is taxation. Different countries and regions have different rules about what is taxed, by what factors, what tax credits are given for what sort of activity, and when payments and credits are to occur. These must appear as cash flows like anything else.
3. Investment Life – Most assets have a finite life and will eventually have to be scrapped or otherwise disposed of. The determinants of this life may be physical (wear and tear, metal fatigue), technical (obsolescence), or market-related (product is no longer in demand).The investment life for appraisal purposes is the shortest applicable.
4. Cost of Capital – The cost of capital is a key factor in assessing the profitability of a project and enters the calculations either directly, as in NPV, or indirectly, as in the comparison of IRR to cost of capital to make an accept/reject decision. The cost of capital is determined by identifying the sources of long-term finance and calculating the interest, dividends, etc. that must be made to service them. For most managers, the cost of capital is determined by the board of directors or senior management and this will be the figure that has to be achieved.
Investment Appraisal and Inflation
Management may decide that irrespective of what it will cost to raise funds, they should be used internally only if the return achieved is at least as good as that which could be achieved by investing outside the organization. By investing internally the opportunity foregone is what could have been earned by those funds in the market and that is what should determine the cost of capital. This idea of a target rate of return is often found in practice.
NPV and IRR take into account the time value of money based on the cost of capital. However, it has been assumed so far that the purchasing power of $1 is constant. If we wish to build an allowance for inflation into our calculations, then this must be done specifically and separately from the time value of money calculations. Even under modest inflation, projects spanning several years will be subject to substantial revision when inflation is considered. In addition, different components of a project may change value at different rates. And in periods of high inflation, it is absolutely necessary to adjust for inflation. Projected profits not adjusted for inflation are misleading and dangerous. Adjustment for inflation should be included in any cash flow estimates prior to applying NPV or IRR analysis.
Activity-based costing attempts to combat the deficiencies of traditional costing techniques. It focuses on the concept that activities, not products, cause costs to be incurred, and products consume activities, and therefore costs. Different activities have different cost drivers. ABC includes all activities such as R&D, sales, etc. and does not confine itself to manufacturing overhead. ABC supposedly provides a more accurate picture of the full cost of a product, which should result in better management decision-making.
Costing for Competitive Advantage
Concept 1 – Depreciation is merely the accounting for a previously incurred cost on fixed assets. In the short term, the supervisor is stuck with both the old and new machines whether he uses them or not. Such costs, and many other factory costs of a similar nature, should be excluded from performance measures; total factory costs, i.e. those costs over the short term that don’t move with production, should be grouped together as one cost. Direct labor will also be included in total factory cost because, in the short term, labor costs do not move with production. Only material costs are excluded from total factory cost.
Concept 2 – Value is created in a business by selling products, not by making them. This runs counter to financial accounting which rewards a business with high end-of-year inventory with a high end-of-year profit. There is no value in inventory, only costs. If productive capacity is idle because demand is slack over the short term, so be it. It is much less costly for a business to incur total factory cost than total factory cost plus a build-up of unwanted inventory. By treating inventory as a cost to be driven out, management can focus on maximizing throughput from manufacturing to the customer. This, rather than a misguided notion of maximizing the efficiency of people and machines, is what drives profit.
Concept 3 – Profitability is defined as the rate at which cash is received from customers at the bottleneck point. The bottleneck point is the limiting factor which most immediately restricts production in the short term.
Return Per Factory Hour = (Sales Price – Materials Cost) / (Time spent at the bottleneck point per product)
Cost Per Factory Hour = (Total Factory Cost) / (Total time available at the bottleneck)
Throughput Ratio = (Return Per Factory Hour) / (Cost Per Factory Hour)
Basically seems to be the idea that accountants should sit in on strategic management discussions. Accountants can supposedly provide neutrality, objectivity, financial precision, and flexible, readable reports, and no other type of management is capable of this feat.